Resin - 3D printing
Escolha 3D resins were projected for printing high quality 3D models. Our formula was developed for applications that require high durability and print resolution. Our Proton resin is recommended for odontology models and alligners.
Benefits
- Excellent print quality: Get the maximum detail possible.
- Low distortion: Very low distortion making it the ideal product for dental modeling and high precision use cases.
DLP/LCD TECHNOLOGY
The Escolha 3D's DLP/LCD line can be used with the main printers on the market, such as:
- Anycubic Photon
- Anycubic Photon S
- Anycubic Photon SE
- Anycubic Photon mono
- Anycubic Photon mono X
- Elegoo Mars
- WANHAO
- KLD
- Phrozen Shuffle
- Phrozen Sonic Mighty 4k
- Miicraft
- EnvisionTec
- W3D
- Flashforge Hunter
TECHNICAL INFORMATION
CONTENT
3D printing UV-curing resin for exclusive use in DLP/LCP 3D printer
Working wavelength – 225- 405nm
Physsical Properties
| Shore D Hardness - After post healing printing | 78 - 82 |
| Viscosity | 80 - 120 mPa.s @ 25 C |
| Bending resistance MPa % MPa | Tension F. Máx.= 23.66 ± 1.737 Def. Esp. F. Máx= 5.014 ± 0.0116 Mód. Elast. = 672.5 ± 57.19 |
| Impact resistance IZOD j/m | 20 (with notch) |
| Density | 1.1 g-mm3 |
PRECAUTIONS
Store in a dry and ventilated place. Keep away from sources of heat, dust and light. Store at controlled room temperature between 4ºC - 29ºC (39ºF – 94ºF). Always keep the container closed when not in use. Avoid contact with skin, eyes and clothing. May cause sensitization through skin contact. Do not ingest or inhale. Wear protective gloves, goggles and mask when handling the product. Avoid contamination of land, pipes and surface water. This product is toxic to aquatic organisms and may cause long-term adverse side effects to the aquatic environment.
Keep out of reach of children and animals.
USAGE
Shake for 2 minutes before use. Place the amount recommended by the manufacturer in the printer tank and start printing. The number of seconds for the initial and subsequent layers to cure will depend on the power of your printer. Wear protective gloves, goggles and a mask to handle the product. After printing, place the objects in isopropyl alcohol for 2 to 4 minutes in motion to remove excess resin from the surface. Dry and place under UV light or sun to finish the curing process. Failure to follow these instructions may lead to undesired effects on the final product.
FIRST AID
SKIN CONTACT: Wipe dry with absorbent paper or towel. Wash off immediately with plenty of water. Do not use organic solvents. In case of dermatitis, seek medical assistance.
EYE CONTACT: Rinse with plenty of running water for 20 to 30 minutes, forward to a doctor if necessary.
INHALATION: Go to a well-ventilated area. If there is strong inhalation of the product, forward to a doctor if necessary.
INGESTION; Do not induce vomiting. The affected person should drink 0.5-1 liter (17.5 fl.oz – 35 fl. oz) of water and seek medical attention.
